Amtrak Susquehanna River Bridge
Amtrak Susquehanna River Bridge | |
---|---|
Southbound Acela Express crosses the bridge. The piers of the predecessor P.W. & B. Railroad Bridge are to the right.
|
|
Coordinates | Lua error in package.lua at line 80: module 'strict' not found. |
Carries | Amtrak Northeast Corridor rail line |
Crosses | Susquehanna River |
Locale | Havre de Grace and Perryville, Maryland |
Official name | Susquehanna River Movable Bridge |
Maintained by | Amtrak |
Characteristics | |
Design | Howe deck truss |
Material | Steel |
Total length | 4,153 feet (1,266 m)[1]:119 |
Number of spans | 18 (including center swing span)[1]:119 |
Clearance below | 52 feet (15.8 m) when closed; 127 feet (38.7 m) when open [2] |
History | |
Opened | May 29, 1906[3] |
The Amtrak Susquehanna River Bridge is a Howe deck truss structure that carries two tracks of Amtrak's Northeast Corridor line across the Susquehanna River between Havre de Grace and Perryville, Maryland.[4]
History
The vicinity of the bridge has been used as a river crossing for more than 300 years. In 1695, the colonial General Assembly granted the first licenses to operate a ferry between Perryville and what is now Havre de Grace. In 1837, railroad lines south from Wilmington, Delaware, and north from Baltimore arrived at the riverbanks. For 29 years, including the duration of the American Civil War, a train ferry carried passengers (on foot) and freight cars between the two towns. In 1854, a larger ferryboat began to transport entire passenger cars across the river.[1]:37–40,111
In 1866, after 12 years of intermittent construction, the Philadelphia, Wilmington, and Baltimore Railroad (PW&B) completed a wooden single-track railroad bridge. Iron reinforcements were added between 1874 and 1880. In 1881, when the Pennsylvania Railroad (PRR) formally took control of the PW&B, it cut rival Baltimore & Ohio Railroad's access to the PW&B. The B&O was forced to construct a parallel route between Baltimore and Philadelphia, including a new bridge about 1 mile (1.6 km) upstream.
In 1904-06, the PRR replaced the PW&B crossing with a new bridge just a few yards upstream.[1]:40–43,117–118 Opened on May 29, 1906,[3] it includes a center swing span to increase vertical clearance for water traffic from the nominal 52 feet (15.8 m).[2] In 1934, the PRR began installing catenary on the span to help extend 11,000-volt electrification south from Wilmington to Washington, D.C. Regular electrified passenger service across the bridge began on February 10, 1935.[1]:44–45
Ownership of the bridge passed to Amtrak in 1976 when it acquired much of the Northeast Corridor infrastructure.[5]
Present status
About 100 Amtrak and MARC passenger trains cross the bridge each weekday at a speed of 90 miles per hour (140 km/h); about 12 freight trains a day cross at a speed of 30 miles per hour (48 km/h). Freight traffic, operated by Norfolk Southern Railway under a trackage rights agreement, is generally restricted to nighttime hours to avoid interfering with passenger operations.[6]
The only significant commercial water traffic under the bridge consists of barges from a large granite quarry just upstream of Havre de Grace.[7]:233 The bridge's swing span rarely needs to be opened; vessels that require such an opening must provide 24-hour advance notice.[1]:125
In 2005 and 2007, Amtrak replaced the ties on the bridge, installed continuous welded rail, and installed new deck-level maintenance walkways, changes meant to extend the life of the bridge by 20 to 25 years.[8]
In May 2011, the U.S. Department of Transportation announced $22 million in funding for engineering and environmental work to replace the bridge.[9] The Bush River and Gunpowder River bridges, two spans of similar age on the Northeast Corridor in Maryland, are also under consideration for replacement.[10]
References
Wikimedia Commons has media related to Amtrak Susquehanna River Bridge. |
- ↑ 1.0 1.1 1.2 1.3 1.4 1.5 Lua error in package.lua at line 80: module 'strict' not found.
- ↑ 2.0 2.1 Lua error in package.lua at line 80: module 'strict' not found.
- ↑ 3.0 3.1 Lua error in package.lua at line 80: module 'strict' not found.
- ↑ Lua error in package.lua at line 80: module 'strict' not found.
- ↑ Lua error in package.lua at line 80: module 'strict' not found.
- ↑ Lua error in package.lua at line 80: module 'strict' not found.
- ↑ Lua error in package.lua at line 80: module 'strict' not found.
- ↑ Lua error in package.lua at line 80: module 'strict' not found.
- ↑ Lua error in package.lua at line 80: module 'strict' not found.
- ↑ Lua error in package.lua at line 80: module 'strict' not found.