Baffles (submarine)

From Infogalactic: the planetary knowledge core
Jump to: navigation, search

Lua error in package.lua at line 80: module 'strict' not found.

File:Submarine baffles.svg
Example diagram of the baffles of a submarine, showing the directional arc behind a submarine where the sonar is ineffective.

The baffles is the area in the water directly behind a submarine or ship through which a hull-mounted sonar cannot hear. This blind spot is caused by the need to insulate the sonar array, commonly mounted near the bow, from the noise of the vessel's machinery.

During the Cold War, one submarine would frequently attempt to follow another by hiding in its baffles. This led to the practice of "clearing the baffles" to detect followers; maneuvers to do this include the "Crazy Ivan", a hard turn to clear the baffles and position the submarine to attack any followers, and "Angles and Dangles", a five-hour process of rapid direction and speed changes to ensure a submarine was not emitting any noise.[1] The baffles-clearing maneuvers undertaken by Soviet Yankee-class submarines were dubbed "Yankee Doodles."[2]

Hiding in a sub's baffles is dangerous because of the risk of collision. Such tactics have fallen out of use since the advent of the towed-array sonar, which negates the baffles' blind spot.

Background and etymology

Since a sonar array is extremely sensitive to underwater sounds, it must be protected from the noise generated by machinery on the vessel on which the sonar is installed. Otherwise, its own noise would tend to drown out other sonar targets. To reduce noise, sound-attenuating material is placed between the sonar and the rest of the vessel. This makes the sonar much more effective, but causes a blind spot where this material is: as most hull-mounted sonars are located at the front of the vessel, the resulting blind spot is located directly behind the vessel.

The term baffles is likely derived from a lesser used definition of the word itself, that of "a partition that prevents interference between sound waves in a loudspeaker." In the instance of its usage in terminology pertaining to submarines, the definition can be expanded and slightly modified to, "an area behind the submarine that due to the cavitation and the wake left by the propulsion system impedes the ability for on-board sonar systems to accurately establish what, if anything, is behind the submarine."

Maneuvers related to the baffles

Clearing the baffles

A submarine tracking another submarine can take advantage of its quarry's baffles to follow at a close distance without being detected. Periodically, a submarine will perform a maneuver called clearing the baffles, in which the boat will turn left or right far enough to listen with the sonar for a few minutes in the area that was previously blocked by the baffles. Good tactics require a submarine to clear the baffles at irregular intervals and in different directions so that a pursuing submarine cannot predict when and how the next baffle-clearing maneuver will be made. When a submarine clears its baffles, a pursuing submarine must take measures to avoid detection by, or worse, collision with, the submarine ahead.

In some cases, submarine commanders could choose to clear the baffles by executing one or a series of hard turns in order to not only clear the baffles, but also be in a favorable position to attack the potentially following submarine. Such extreme maneuvers were more commonly used by Soviet Navy submarines during the Cold War than by other forces, leading to the maneuver's nickname: "Crazy Ivan". The "crazy" came from the danger such a maneuver posed to both submarines, first being detection of the following submarine, which was commonly avoided by stopping the engines and going to maximum silence, and secondly by collision, as the momentum of the pursuing boat could result in collision with the leading submarine; dead ahead in the process of turning sharply.

Angles and Dangles

Although not specifically a baffle-clearing maneuver, the exercise known as "Angles and Dangles" (a series of random figure eights, sharp turns, and random depth changes) is intended to eliminate the unintended self-noise which could occur during a baffle-clearing event. The exercise is executed at the start of a voyage, in order to determine if loose items aboard the submarine are properly rigged for sea; loose items can fall or shift position during the sudden maneuvers required during baffle clearing, making noise that could be detected by the opposing submarine.

Use of towed array sonars

Most present-day submarines and ships carry a towed array sonar: a sonar sensor mounted on a long cable let out behind the vessel. This can pick up sounds in the area behind the baffles, reducing the need for baffle-clearing maneuvers. One reason for this is that towed-array sonars typically have a different frequency response than hull-mounted sonar sensors. Towed array sensors have conical-shaped beams and as a result, have extremely poor directivity in the "end-fire" regions of the array[clarification needed].

References

  • Lua error in package.lua at line 80: module 'strict' not found.
  1. Sherry Sontag and Christopher Drew, Blind Man's Bluff: The Untold Story of American Submarine Espionage (New York: Harper Paperbacks, 2000), pp. 137, 144.
  2. Sontag and Drew, Blind Man's Bluff, 130-139.

External links