Batman & Robin: The Chiller

From Infogalactic: the planetary knowledge core
Jump to: navigation, search

<templatestyles src="Module:Infobox/styles.css"></templatestyles>

Batman & Robin: The Chiller
Chiller tower.jpg
Chiller's main inversions, the top hat and the cobra roll
Beto Carrero World
Coordinates Lua error in package.lua at line 80: module 'strict' not found.
Status In Storage
Six Flags Great Adventure
Park section Movietown
Coordinates Lua error in package.lua at line 80: module 'strict' not found.
Status Closed
Soft opening date June 1997
Opening date April 1998 (1998-04)
Closing date June 28, 2007 (2007-06-28)
Cost US$15,000,000
Replaced by Batman: The Dark Knight
General Statistics
Type Steel – Launched – Shuttle
Manufacturer Premier Rides
Designer Werner Stengel
Model Dueling LIM Shuttle Loop Coaster
Track layout Dueling
Lift/launch system LIM launch track
Batman Robin
Height 200 ft (61.0 m) 200 ft (61.0 m)
Drop 140 ft (42.7 m) 105 ft (32.0 m)
Length 1,137 ft (346.6 m) 1,229 ft (374.6 m)
Speed 65 mph (104.6 km/h) 65 mph (104.6 km/h)
Inversions 1 2
Duration 0:32 0:48
Max vertical angle 90° 90°
Acceleration 0 to 65 mph (105 km/h) in 4 seconds 0 to 65 mph (105 km/h) in 4 seconds
G-force 5 5
Capacity 1360 riders per hour
Restraint Style Individual ratcheting lap bar, formerly individual shoulder harness
Height restriction 54 in (137 cm)
Trains 2 (one on each side) trains with 5 cars. Riders are arranged 2 across in 2 rows for a total of 20 riders per train.
{{{name}}} at RCDB
Pictures of {{{name}}} at RCDB

Batman & Robin: The Chiller was a sit down dual track looping shuttle roller coaster designed by Premier Rides that is currently in storage at Beto Carrero World. It operated at Six Flags Great Adventure in Jackson, New Jersey, from 1997 to 2007, but due to the constant downtime and flaws in the ride's operation, Six Flags removed the ride from the park in fall 2007. All track and supports were removed. However, the station, observatory scenery piece and outdoor queue line were left. The ride was fabricated by Dynamic Structures and Intermountain Lift, Inc.[1][2]

History

Six Flags Great Adventure

In 1996, Six Flags Great Adventure announced that it would be adding a new roller coaster in 1997, bringing their coaster count back up to seven. It was then announced that the coaster would be a prototype linear induction motor (LIM) launched dual tracked shuttle coaster dubbed "Batman & Robin: The Chiller". The theme was chosen with the intent of promoting the Batman & Robin film, which was set to open in summer that year. The Observatory scenery piece, that eventually loomed over the launch tracks and exit ramp, was taken directly from the film source material. A track was devoted to both titular characters, with the icy blue track being christened Batman and its fiery red companion being labeled Robin. The coaster was located in the Movietown section of the park, adjacent to Batman The Ride, Stuntman's Freefall and "The Batman Stunt Show Arena", while sitting next to the Movietown Water Effect water ride.

Since it was a prototype (like X2 at Six Flags Magic Mountain and Hypersonic XLC at Kings Dominion) it suffered from many problems and flaws. After several delays, the coaster opened briefly in June 1997 before shutting down due to further technical difficulties.[3] It opened full-time in April 1998, although power shortages prevented "duel launches".

With the original shoulder restraints, riders experienced some discomfort during the ride. The restraints were converted to individually ratcheting lap bars in the 2001 and 2002 seasons on the Batman and Robin trains, respectively.

During the 2004 season, the LIMs on the Robin side of the tower failed causing the train to stall in the zero G roll. The cause of the LIMs' failure is still unknown. The Batman side was also closed for most of the season.

Chiller was repainted before the 2005 season began, giving a new dark blue color to the Batman side while touching up the Robin side's fading red. Batman did not operate at all due to problems with the LIMs on the tower. The Robin side operated for most of the season.

During the 2006 season, Batman reopened on May 5 and ran along with the Robin side on and off until June 2, when a wheel bogie on the third car of the Robin train suffered a mechanical malfunction. While the cause of the malfunction is still unknown to most people, it has been reported that the train came to a halt on the lowest part of the track (between the Cobra Roll and Zero-G roll) after the launch. This problem is speculated to have happened because of wheel modifications that Premier Rides made on Chiller as well as all other Premier LIM coasters. Although the train was loaded, no one was seriously injured and all riders were evacuated. Both sides remained closed for the rest of the season.

During the 2007 season, the Zero-G Rolls were removed from the ride and replaced with banked hills. Robin's hill was installed in March and Batman's in April. Batman's train was painted red so that Robin could use it, because Robin's train was damaged during a previous incident. The Robin side re-opened on April 7 and ran until June 28 when it was closed for the rest of the year. The Batman side did not operate at all, but three of the five cars from the original Robin train were placed on Batman's maintenance track. Because of all of the problems the coaster had and the numerous failed attempts to fix the coaster, Six Flags decided to cut their financial and technical losses and dismantle the ride.

During the 2008 season, the ride was completely removed, leaving only the station, observatory and queue line behind. The following year, the remaining foundation caps under the observatory and the former exit ramp were removed. The parts of the ride were relocated to the adjacent Plumsted Township in New Jersey where they sat in storage for many years.[4]

Following the removal of the ride, the queue line was used for the "Escape From The Asylum" Terror Trail during Fright Fest. The Fright Fest exclusive attraction turned the former ride area into a Terror Trail maze for guests to walk through while costumed employees were hiding and frequently scaring guests. The remodelled observatory opened on July 3, 2009, as the "Xploratorium", a new attraction with many virtual and interactive features for park guests to enjoy.

Beto Carrero World

In 2012, Batman & Robin: The Chiller was sold[5] to be relocated to Beto Carrero World in South America. Beto Carrero World is the largest theme park in Latin America, located in the municipality of Penha, Santa Catarina State, Brazil. The park is a development of the late Beto Carrero. The inauguration took place in 1991. The park has a total area of 21 km ² and is divided into three major segments:[4] As of 2015, The Chiller still remains in storage.

Ride

Batman & Robin: The Chiller's entrance and the two 200-foot Tower.

"Chiller" used a LIM launch system that propelled the trains from 0 to 65 miles per hour (105 km/h) in roughly 4 seconds.[3] In its first season, the ride originally ran dualling as intended for a short time. Due to the amount of power used by the LIMs straining the infrastructure with a dual launch, operations were changed so that a train could only be launched after the other train had cleared the LIMs on the tower. Batman was launched into a 140-foot (43 m) top hat inversion. It then went through a banked inclined S-curve (formerly a zero-g roll) and then repeated the entire process in reverse. Robin had a similar track layout, except it had a 105-foot (32 m) cobra roll instead of a top hat. Because of the differentiating heights in the main elements (and therefore the speed required to return through the course) Batman required 14 LIMs on the tower while Robin usually only needed 6 or 8.

The original ride layout had a zero-g roll on each side after first pair of main elements. Batman came out of the top hat and Robin out of the cobra roll and they both went through the zero-g roll before climbing the 200-foot (61 m) tower. After the tower, the trains would travel in reverse down the tower and through the main elements (inverted top hat for Batman, cobra roll for Robin) before returning to the station platform.

Ride modifications and changes

After the electrical outage problems that caused the ride's delay in opening and at the state of New Jersey's request the computer software was updated before reopening the ride in 1998 that would ensure the ride would not duel launch. In the event the ride operator tried to launch both at the same time whether on purpose or on accident the computer system would hold one of the train's launch for a few seconds.

In September 2001, the train on the Robin track was retrofitted with lap bars in place of the shoulder restraints. Both sides operated with lap bars by June 2002.

Several modifications were made to the number of LIMs on the Robin tower. From opening day to 2004, Robin operated with 7 LIMs on each side of the track. Before the 2004 season, 3 LIMs were taken off on both sides of the Robin tower, leaving 4 LIMs per side. Then two more LIMs were taken off (one per side) the Robin side's tower, leaving three per side before the 2005 season began. A few weeks after the Chiller re-opened in 2007, two more LIMs were added back to the tower, bringing the total back to 4 per side.

In December 2006 and January 2007, during the off-season, both zero-G rolls were removed from the ride. The rolls were a problem due to concerns of occasional stalling caused by a failure of the tower's LIMs. The rolls were replaced by a slightly banked inclined S-curve. Batman's train had its shells painted red so Robin could be ready to open first before Batman. This was done because Robin was more reliable than Batman and the track replacement for Robin was completed first on March 13. It re-opened on April 7. Batman's track was replaced between April 16 and April 20, while the park was closed. However, Batman never re-opened.

See also

References

  1. Lua error in package.lua at line 80: module 'strict' not found.
  2. Lua error in package.lua at line 80: module 'strict' not found.
  3. 3.0 3.1 Lua error in package.lua at line 80: module 'strict' not found.
  4. 4.0 4.1 Lua error in package.lua at line 80: module 'strict' not found.
  5. Lua error in package.lua at line 80: module 'strict' not found.

External links