Naro-1
Life sized replica of Naro (left) |
|
Function | launch vehicle |
---|---|
Manufacturer | GKNPTs Khrunichev (first stage) KARI (second stage) |
Size | |
Height | 33 m (108 ft) |
Diameter | 3 m (9.9 ft) |
Mass | 140,000 kg (300,000 lb) |
Stages | 2 |
Launch history | |
Status | Retired |
Launch sites | Naro Space Center |
Total launches | 3 |
Successes | 1 |
Failures | 2[1][2] |
First flight | 25 August 2009 |
First stage | |
Engines | 1 RD-151 |
Thrust | 1670 kN |
Specific impulse | 338 sec |
Burn time | 300 seconds |
Fuel | LOX/Kerosene |
Second stage | |
Engines | 1 Solid rocket motor |
Thrust | 86.2 kN |
Specific impulse | 250 sec |
Burn time | 25 seconds |
Fuel | Solid |
Naro-1 | |
Hangul | 나로호 |
---|---|
Hanja | 羅老號 |
Revised Romanization | Naroho |
McCune–Reischauer | Naroho |
Naro-1 (Korean: 나로호), previously designated the Korea Space Launch Vehicle or KSLV, is South Korea's first carrier rocket.[3] and the first South Korean launch vehicle to achieve Earth orbit.[4] On 30 January 2013 the third Naro-1 vehicle built successfully placed STSAT-2C into low Earth orbit.
The solid-fuel rocket second stage was built by KARI, the national space agency of South Korea, and Korean Air. The first stage was purchased by KARI after manufacture by NPO Energomash, the maker of the Russian Angara rocket.
Neither the maiden flight on 25 August 2009 nor the second flight on 10 June 2010 reached orbit. The third flight on 30 January 2013 successfully reached orbit. The launches took place from the Naro Space Center. The official name of the first KSLV rocket, KSLV-I, is Naro, which is the name of the region in which Naro Space Center is located.[5][6]
Contents
History
In 1992, Republic of Korea developed and launched several satellite systems and rockets overseas, such as the solid-fueled KSR-1 and KSR-2 sounding rockets. In 2000, Republic of Korea began construction of the Naro Space Center, located on Naro Island in Goheung, 485 kilometres (301 mi) south of Seoul, with Russian assistance. The work was completed by the launch of the 6,000-kilogram (13,000 lb) KSR-3 liquid-propellant sounding rocket on 28 November 2002. South Korea announced in 2002 that it intended to develop a small satellite launch vehicle by 2005 that would be based on technology flown on the KSR-3 test vehicle. The launcher would be entirely indigenous, based on the 122.500-kilonewton (27,539 lbf) thrust LOX/kerosene motor used for the KSR-3 rocket stage.[7][8] In 2005 a change was announced, indicating that they would use the Russian RD-191 as the vehicle's first stage. The program, like that of the Angara, was subject to continuous funding shortages and schedule delays.[9]
On 26 October 2004, during the visit of a GKNPTs Khrunichev delegation headed by A. A. Medvedev, Director General to Republic of Korea, a contract was signed to design and build a Space Rocket Complex for the small-lift launch vehicle KSLV-1. The design represented a joint effort between GKNPTs Khrunichev partner NPO Energomash "V. P. Glushko", who would build the first stage of KSLV-1, and Republic of Korea KARI, who would design and produce the second stage. As the prerequisite to signing the contract South Korea joined the Missile Technology Control Regime (MTCR). All documentation was reviewed by the Russian Space Agency (RSA), and the joint project to build the Korean rocket complex was approved.[10] The vehicle was unveiled at the Naro Space Center in Goheung, South Jeolla Province in October 2008. South Korea has spent some KR₩500 billion (US$490 million) since 2002 on the project.[11]
The total cost of the first three launches was over 500 billion won (US$450 million), raising concerns among the Korean populace about the value of the Naro space program.[12]
Impediments to South Korean rocket development
Republic of Korea efforts to build an indigenous space launch vehicle is hindered due to persistent political pressure of the United States, who had for many decades hindered South Korea's indigenous rocket and missile development programs[13] in fear of their possible connection to clandestine military ballistic missile programs.[14] South Korea has sought the assistance of foreign countries such as Russia through MTCR commitments to supplement its restricted domestic rocket technology. South Korea is working on an engine for an indigenous launcher planned for 2021.[15]
Vehicle description
The whole rocket was originally planned to be completely indigenous, but due to technological constraints largely spurred by political pressure from the United States that discouraged independent research and development of rocket technology by South Korea,[16] KARI decided that the KSLV would be built on the basis of the universal rocket module (URM) designed for the Russian Angara family of rockets.[9] The first stage of the vehicle uses the Russian RD-151 engine, which is essentially the RD-191 de-powered to 170 tonnes-force (1.7 MN; 370,000 lbf)[17][18] from 190 tonnes. The second stage is a solid rocket motor developed and built by KARI.[19] The launch vehicle weighs 140 tonnes (310,000 lb), stands 33 metres (108 ft) tall and has a diameter of almost 3 metres (9 ft 10 in).[20]
Launch history
Flight # | Variant | Date of Launch | Launch Location | Payload | Outcome | Remarks |
---|---|---|---|---|---|---|
1 | Naro-1 | 25 Aug 2009 08:00 UTC (17:00 KST)[21] | Naro Space Center | STSAT-2A | Failure[22] | Fairing did not separate, failed to reach orbit[1] |
2 | Naro-1 | 10 Jun 2010, 08:01 UTC (17:01 KST)[23] | Naro Space Center[24] | STSAT-2B | Failure | Signal lost 137 seconds after launch,[2] cause disputed. |
3 | Naro-1 | 30 January 2013, 07:00 UTC (16:00 KST)[25] | Naro Space Center | STSAT-2C | Successful |
First flight
<templatestyles src="Module:Hatnote/styles.css"></templatestyles>
The first launch of the Naro-1 took place on 25 August 2009. The rocket was launched from the Naro Space Center. The Khrunichev-built first stage reportedly performed nominally,[22] and the second stage separation took place as expected,[26] but the payload fairing separation system malfunctioned and half of the satellite protective cover stayed bolted to the second stage. The added weight of the remaining fairing caused the rocket to tumble upwards[27] and to be thrown off its nominal course, soaring 20 kilometres (12 mi) above the planned altitude before falling down.[1] The payload (STSAT-2) reentered the atmosphere and disintegrated.[27]
The Government of the Republic of Korea officially approved the launch of the KSLV in June 2009, which was expected to send the STSAT-2A satellite into orbit.[28] The launch was first tentatively scheduled for 11 August, after receiving approval from the National Space Committee.[29] The first actual attempt to launch Naro-1 was conducted on 19 August 2009, but the launch was canceled seven minutes 56 seconds before launch.
Second flight
<templatestyles src="Module:Hatnote/styles.css"></templatestyles>
Wikinews has related news: South Korean Naro-1 space rocket explodes after take-off |
The launch of the second Naro-1 took place on 10 June 2010 at 08:01 UTC. The launch ended in failure 137 seconds (2 minutes 17 seconds) later, when contact with the rocket was lost.[2] Ahn Byung-man, Minister of Science and Technology, told reporters that the rocket was believed to have exploded in midair. The launch originally had been scheduled for 9 June 2010,[30] but was postponed due to a malfunction of a fire protection system.[31]
Thirteen engineering experts from Republic of Korea and thirteen from Russian Federation formed a Failure Review Board and met in August 2010 to discuss the launch. They were able to officially conclude that the launch had failed. Further investigation was ongoing as to the cause of the failure.[32] As of 11 November 2010, a definitive cause for the failure had not been determined.[33] According to the Director-General of GKNPTs Khrunichev, Vladimir Nesterov, the telemetry data received by his company does not point to any off-nominal performance of the Khrunichev-built first stage.[34] A new team consisting of 30 experts was formed to investigate the cause of the failure.[35] According to findings of a Russian independent commission made public in August 2011, an error had occurred in the rocket's second stage produced by KARI.[36]
Third flight
<templatestyles src="Module:Hatnote/styles.css"></templatestyles>
Naro-1 became the first South Korean launch vehicle to achieve Earth orbit on January 30, 2013, when it was successfully used to launch the Science and Technology Satellite 2C (STSAT-2C). Naro-1 launched from the Naro Space Center, located 480 kilometers south of Seoul,[4]
Previous launch history for the third flight
Launch of the third flight was postponed from its original launch date of late October to sometime in mid to late November due to a damaged rubber ring that caused a fuel leak.[37][38][39][40] A launch countdown on 29 November was halted 17 minutes prior to launch due to an excessive electric current reading, indicating some type of electrical malfunction. Diagnosing and correcting the problem were reported to require delaying the launch for at least four days.[41][full citation needed] The Republic of Korea government announced this would be the final flight attempt. Had the mission failed there would not be another attempt and the project would come to an end.[42]
While the immediate cause of the leak was a damaged rubber seal further investigation into the failure revealed a defective adapter bloc linking the rocket to the port. Korean ministry announced that the new adapters will be brought in from Russia in preparation for the launch. A new preliminary launch date no earlier than 24 November 2012 was also announced.[43][full citation needed][44][full citation needed]
While no cause for the failure of the second launch has officially been declared, changes to the third launch were to include eliminating the flight termination system on the second stage (built by Republic of Korea KARI), and changes to the system on the first stage (supplied by Russia). Changes to the electrical system that operates the payload fairing were also to be made.[45][full citation needed]
The first stage of the rocket Naro-1 for the third attempt was delivered from the Russian manufacturer at the end of August 2012.[46][full citation needed]
Shortly after the mishap with the second launch attempt, South Korea had announced the third flight would take place in 2011.[47][full citation needed] Specific plans were never announced and no launch attempt was made in 2011.
Political impact
The launch of Naro-1 occurred one month after North Korea's successful December 2012 launch of their Unha-3[48] rocket developed with North Korean technology.[49] The launch came in the wake of news that North Korea had plans for a third nuclear test.[50] Chinese Navy official Yin Zhuo said that South Korea has been competing with Japan for favor with the United States, and the launch aims to strengthen relations with the U.S.[51]
Comparable rockets
See also
- Comparison of orbital launchers families
- Comparison of orbital launch systems
- 2010 in spaceflight
- List of launch vehicles
- List of Korea-related topics
- Timeline of first orbital launches by country
References
- ↑ 1.0 1.1 1.2 Lua error in package.lua at line 80: module 'strict' not found.
- ↑ 2.0 2.1 2.2 Lua error in package.lua at line 80: module 'strict' not found.
- ↑ Lua error in package.lua at line 80: module 'strict' not found.
- ↑ 4.0 4.1 Lua error in package.lua at line 80: module 'strict' not found.
- ↑ Lua error in package.lua at line 80: module 'strict' not found.
- ↑ Lua error in package.lua at line 80: module 'strict' not found.
- ↑ Lua error in package.lua at line 80: module 'strict' not found.
- ↑ KSR-3 on astronautix.com
- ↑ 9.0 9.1 Lua error in package.lua at line 80: module 'strict' not found.
- ↑ Lua error in package.lua at line 80: module 'strict' not found.
- ↑ Lua error in package.lua at line 80: module 'strict' not found.
- ↑ Lua error in package.lua at line 80: module 'strict' not found.
- ↑ Lua error in package.lua at line 80: module 'strict' not found.
- ↑ Lua error in package.lua at line 80: module 'strict' not found.
- ↑ Lua error in package.lua at line 80: module 'strict' not found.
- ↑ Lua error in package.lua at line 80: module 'strict' not found.
- ↑ Lua error in package.lua at line 80: module 'strict' not found.
- ↑ Lua error in package.lua at line 80: module 'strict' not found.
- ↑ Lua error in package.lua at line 80: module 'strict' not found.
- ↑ Lua error in package.lua at line 80: module 'strict' not found.
- ↑ Lua error in package.lua at line 80: module 'strict' not found.
- ↑ 22.0 22.1 Lua error in package.lua at line 80: module 'strict' not found.
- ↑ Lua error in package.lua at line 80: module 'strict' not found.
- ↑ Lua error in package.lua at line 80: module 'strict' not found.
- ↑ Lua error in package.lua at line 80: module 'strict' not found.
- ↑ Lua error in package.lua at line 80: module 'strict' not found.
- ↑ 27.0 27.1 What happened to space rocket Naro during 9 minute span?... 'Fairing fails to detach, satellite disintegrates'
- ↑ Naro Spacecraft Approved for Launch from Naro Space Center
- ↑ S.Korea first rocket launch set for August 11
- ↑ Lua error in package.lua at line 80: module 'strict' not found.
- ↑ Lua error in package.lua at line 80: module 'strict' not found.
- ↑ Third Naro to be launched in 2011
- ↑ [1]
- ↑ Interview with Vladimir Nesterov, Director-General, GKNPTs Khrunichev Marker.ru
- ↑ Probe into failed launch, KBS World
- ↑ Russian equipment not at fault for South Korean rocket accident
- ↑ [2]
- ↑ Lua error in package.lua at line 80: module 'strict' not found.
- ↑ Lua error in package.lua at line 80: module 'strict' not found.
- ↑ Lua error in package.lua at line 80: module 'strict' not found.
- ↑ S. Korea delays scheduled launch
- ↑ Naro-1 To Launch By End Of MonthParabolic Arc Retrieved on 27 November 2012.
- ↑ http://english.donga.com/srv/service.php3?bicode=020000&biid=2012110656858
- ↑ [3]
- ↑ Korea, Russia to launch 3rd Naro rocket
- ↑ Naro-1 first stage rocket arrives in S. Korea
- ↑ S. Korea to pursue third launch of Naro
- ↑ Lua error in package.lua at line 80: module 'strict' not found.
- ↑ Lua error in package.lua at line 80: module 'strict' not found.
- ↑ Lua error in package.lua at line 80: module 'strict' not found.
- ↑ Lua error in package.lua at line 80: module 'strict' not found.