USRA Light Santa Fe
300px |
|
Specifications |
AAR wheel arr |
2-10-2 |
UIC class |
1′E1′ h2 |
Gauge |
4 ft 8 1⁄2 in (1,435 mm) standard gauge |
Leading dia |
33 in (838 mm) |
Driver diameter |
57 in (1,448 mm) |
Trailing dia |
43 in (1,092 mm) |
Wheelbase |
40 ft 4 in (12.29 m) |
Length |
52 ft 10 in (16.10 m) without tender |
Width |
10 ft 8 in (3.25 m) |
Height |
15 ft 0 in (4.57 m) |
Adhesive weight |
274,000 lb (124,000 kilograms; 124 metric tons) |
Loco weight |
352,000 lb (160,000 kilograms; 160 metric tons) |
Loco & tender weight |
540,300 lb (245,100 kilograms; 245.1 metric tons) |
Fuel type |
Soft coal (bituminous) |
Boiler pressure |
200 lbf/in2 (1.38 MPa) |
Firegrate area |
76.3 sq ft (7.09 m2) |
Heating surface |
4,666 sq ft (433.5 m2) |
• Tubes |
2,970 sq ft (275.9 m2) |
• Flues |
1,323 sq ft (122.9 m2) |
• Firebox |
373 sq ft (34.7 m2) |
Superheater:
• Heating area |
1,085 sq ft (100.8 m2) |
Cylinders |
Two |
Cylinder size |
27 in × 32 in (686 mm × 813 mm) |
Valve gear |
Southern (see drawing) |
|
|
The USRA Light Santa Fe was a USRA standard class of steam locomotive designed under the control of the United States Railroad Administration, the nationalized railroad system in the United States during World War I. These locomotives were of 2-10-2 wheel arrangement in the Whyte notation, or 1′E1′ in UIC classification; this arrangement was commonly named "Santa Fe" in the United States. At the time, the Santa Fe was the largest non-articulated type in common use, primarily in slow drag freight duty in ore or coal service.
A total of 94 of these locomotives were constructed under the auspices of the USRA. They went to the following railroads:
Only one USRA Light 2-10-2 survives: DM&IR 506 is on display at the National Railroad Museum in Green Bay, Wisconsin
References
- ↑ Lua error in package.lua at line 80: module 'strict' not found.
- ↑ Lua error in package.lua at line 80: module 'strict' not found.
- ↑ Drury p.212
- ↑ Drury pp.168, 170
- ↑ Drury, pp. 64, 278
- ↑ Drury, p.350
- ↑ Drury pp.370, 372
- Lua error in package.lua at line 80: module 'strict' not found.
|
Switchers |
|
Light |
|
Heavy |
|
Articulated |
|
|