Froskepôlemolen

From Infogalactic: the planetary knowledge core
Jump to: navigation, search
Froskepôlemolen, Leeuwarden
Froskepôle.jpg
Froskepôlemolen, August 2008.
Origin
Mill name Froskepôlemolen
Mill location De Froskepôle, Leeuwarden
Lua error in package.lua at line 80: module 'strict' not found.
Operator(s) Gemeente Leeuwarden
Year built 1962
Information
Purpose Drainage mill
Type Smock mill
Storeys Three-storey smock
Base storeys Single-storey base
Number of sails Four sails
Type of sails Common sails
Windshaft Cast iron
Winding Tailpole and winch
Auxiliary power electric motor
Type of pump Archimedes' screw
Other information Name often misspelled as "Froskepôllemolen"

Froskepôlemolen is a smock mill in Leeuwarden, Friesland, Netherlands which dates from 1896 but was rebuilt on its present site in 1962. The mill has been restored to working order and is listed as a Rijksmonument, number 24507.[1]

History

Froskepôlemolen was originally built in 1896 on the De Zwette waterway, where it was known as De Zwettemolen. It drained the Het Huizumer and the Goutumer Nieuwland polders, which had an area of 350 hectares (860 acres) between them. the mill had Patent sails on both stocks, but by 1940 was working on one pair of sails.[2] By 1962, the mill had been surrounded by industrial buildings and it was moved to a new position within Leeuwarden.[3] This was done by loading the mill body onto two barges and transporting it along the Van Harinxmakanaal. The cost of the move was estimated at ƒ42.000. The work was done by millwright A de Roos.[2] Restoration of the mill was complete in 1966.[3] A further restoration was undertaken in 1982-83.[4] The thatch on the mill was renewed in October 2009.[2] The mill is owned by the Gemeente Leeuwarden

Description

<templatestyles src="Module:Hatnote/styles.css"></templatestyles>

Froskepôlemolen is what the Dutch describe as a Grondzeiler. It is a three-storey smock mill on a single-storey base. There is no stage, the sails reaching almost to ground level. The mill is winded by tailpole and winch. The smock and cap are thatched. The sails are Common sails.[3] They have a span of 17.80 metres (58 ft 5 in).[1] The sails are carried on a cast-iron windshaft. The windshaft also carries the brake wheel which has 45 cogs. This drives the wallower (24 cogs) at the top of the upright shaft. At the bottom of the upright shaft the crown wheel, which has 33 cogs drives a gearwheel with 28 cogs on the axle of the Archimedes' screw.[3] The axle of the Archimedes' screw is 360 millimetres (1 ft 2 in) diameter. The screw is 1.50 metres (4 ft 11 in) diameter. It is inclined at 26°. Each revolution of the screw lifts 753 litres (166 imp gal) of water.

Public access

Froskepôlemolen is open to the public by appointment.[5]

References

  1. 1.0 1.1 Lua error in package.lua at line 80: module 'strict' not found.
  2. 2.0 2.1 2.2 Lua error in package.lua at line 80: module 'strict' not found.
  3. 3.0 3.1 3.2 3.3 Lua error in package.lua at line 80: module 'strict' not found.
  4. Lua error in package.lua at line 80: module 'strict' not found.
  5. Lua error in package.lua at line 80: module 'strict' not found.